CFDs are complex instruments and come with a high risk of losing money rapidly due to leverage. 69% of retail investor accounts lose money when trading CFDs with this provider. You should consider whether you understand how CFDs work and whether you can afford to take the high risk of losing your money.
CFDs are complex instruments and come with a high risk of losing money rapidly due to leverage. 69% of retail investor accounts lose money when trading CFDs with this provider. You should consider whether you understand how CFDs work and whether you can afford to take the high risk of losing your money.

What is breakout trading?

Article By: ,  Financial Writer

What is a breakout?

A breakout is when a security’s price moves above or below an established support or resistance level, often leading to a significant bull or bear trend. Identifying and entering a breakout early is an attractive strategy for traders because it utilizes periods of high volume and volatility to return sizable profits.

Breakouts themselves occur due to a shift in the supply and demand of a security. Once the price of a security moves beyond a set boundary, more traders become involved in the movement, either actively as day traders or passively through various order types.

What is breakout trading?

Breakout trading is a strategy that capitalises on the potential price action during a breakout. Essentially, you try to predict when a breakout will occur and then profit from the resulting trend.

Breakout traders consist of three parts: spotting the breakout, entering the trade, and closing at the correct moment. Spotting breakouts is the key element and is done by identifying consolidated ranges formed when a price is trading within levels of support and resistance.

TIP: How do breakout trades gain momentum?

The longer it takes for the price to break out of the consolidated range, the stronger the resulting trend will be. A driving factor of this phenomenon is the traders’ actions around the levels of support and resistance.

When a security trades between support and resistance levels, many traders will set buy and sell stop orders right beyond these levels to capture the breakout. So when a breakout occurs, these orders are triggered and give further momentum to the breakout.

How to spot breakouts

To spot breakouts, you’ll need to follow two steps. First, you identify the support or resistance levels a market is struggling to break beyond. Second, you wait for a signal that indicates the breakout may be imminent.

As mentioned above, support and resistance ranges can take several shapes, but they all indicate impending or possible breakouts within the price action. Let’s look at a few key examples of consolidation patterns.

Rectangle and channels

Rectangles patterns occur when the price moves between horizontal levels of support and resistance, causing the entire price action to move in a sideways box. Channel patterns are like rectangles except they are angled up or down and indicate a bullish or bearish range trading. Like horizontal rectangles, angled channels maintain parallel levels of support and resistance.

 

Triangles and flags

Triangle patterns are characterized by converging trendlines connecting a series of highs and lows; they can be ascending or descending or symmetrical. Symmetrical triangles feature two converging trendlines and feature a neutral pattern; the breakout after the formation of a symmetrical triangle typically continues in the direction of the existing trend.

 

In an ascending triangle, the upper trendline is flat while the lower trendline narrows upward making higher lows. This formation indicates buyers are more aggressive than sellers, and the breakout is likely to occur on the upside.

 

A descending triangle is the inverse of an ascending pattern. The lower trendline remains flat while the upper trendline slants downwards from the price making lower highs. Typically, in descending triangles the price eventually breaks through the lower trendline. 

 

Flag patterns, or pennants, are short-term patterns that have less dramatic trend line convergences compared to triangles. They have a ‘flagpole’ at the beginning of the pattern created when price action spikes or dives sharply in the direction of the current trend. Prices then consolidate into a flag pattern before breaking out again in the same direction as the initial flagpole.

 

Head and shoulders

Head and shoulders patterns form as a baseline with three peaks, in which the middle peak is highest and the first and third peaks are near equal height. This formation often precedes a bullish-to-bearish reversal that occurs as a breakout.

 

Cup and handle

The cup and handle pattern forms when price action creates a u-shaped cup and then a handle drifting downward. This pattern is a sign of a bullish continuation, wherein the price will break above the resistance level at the rim of the cup after a short downtrend.

 

Once levels of support and resistance have been established, it’s time to look for a breakout signal. Most traders do this using indicators, which can also help you evaluate the strength of impending breakouts.

As well as indicators, many traders will keep an eye on a market’s volume as they watch for a breakout. A spike in volume can be a solid indication of a strong breakout that leads to a lasting trend.

MACD

The Moving Average Convergence Divergence (MACD) indicator uses several moving averages to evaluate recent price changes, allowing you to gauge momentum as price movement nears or breaks through lines of support and resistance. Conversely, traders can also use MACD to spot slowing momentum in a trend, letting them know when to exit a trade after entering the breakout.

Bollinger Bands

Bollinger Bands use lines of standard deviation and a 20-day simple moving average (SMA) and can be used to determine when price movement is swinging into a trend. When the price’s SMA moves above or below lines of standard deviation, a reversal breakout may occur. You can strengthen this signal by combining Bollinger Bands with the MACD to see the strength of possible reversals indicator by the Bollinger Bands. 

RSI

The Relative Strength Index (RSI) determines when a security is overbought or oversold, indicating its price may be ready to pivot in the other direction. The stronger the price reversal, the more likely a breakout will occur.

You can also use a volume RSI chart, where the changes in price are replaced by up-volume and down-volume for the formula.

How to trade breakouts

Once you’ve spotted an impending breakout, it’ll be time to plan your entry point.

There are three places to enter a breakout: prior to the breakout, on the breakout, and after the breakout. Each comes with varying levels of risk and reward.

Entrance

Method

Benefits

Drawbacks

Before the breakout

While the price is still trading in the bounded range, enter a position in the direction you believe the breakout will occur.

Avoid high slippage and volatility, likely to get a better price.

Your trade is more susceptible to false breakouts.

On the breakout

Set an order to be filled right beyond the support or resistance level you suspect a breakout to occur on.

You’ll quickly know if the breakout is real or false and whether to close out early.

Your entry may experience higher slippage and volatility than entering before the breakout.

After the breakout

Wait for a pullback after the breakout, then trade the new trend using the previous line of support or resistance as the new resistance or support.

Safeguards against false breakouts and provides the ability to ride the new trend once short-term traders have taken their profit.

While you are entering at the safest point, your profits won’t be as high as traders who enter earlier.

How to close your breakout trade

Planning your exit is just as crucial as your entry when it comes to profiting from breakout trading. Before you open your position, you should look to establish a reasonable profit objective and set stop and limits appropriately.

Establishing a profit objective

There are several ways to establish your profit objective. For example, one method is to look at recent price action and determine an objective based on the range of price movement exhibited before the breakout. If the support and resistance levels were six points apart, a reasonable objective could be six points in the direction of the breakout. For non-parallel ranges like descending triangles, you can take an average of the price swings and set that number as your objective.

Exiting with a loss

Another advantage to the breakout trading strategy is the relative speed at which you can identify when the breakout is false. In a regular breakout, old support levels should operate as new resistance, and old resistance levels should become the level of support. If the price crosses back over one of the original levels, it’s a sign of a false breakout. You can set stop-loss orders at these original levels once you’ve entered the trade to protect yourself or exit the trade quickly once the failed breakout is confirmed to curb losses.

How to trade a breakout in forex

Trading breakouts in forex works exactly like any other market – although you’ll have to rely exclusively on volatility because you won’t be able to assess volume.

An easy way to time volatility when trading forex is to wait for the start of a new trading session, such as the London or New York section (the two busiest in forex trading). During the start of the sessions, related majors will experience higher volatility and are more likely to breakout from the consolidated ranges they traded in during slower sessions.

A prime example is the European Opening Range breakout strategy. Here, you would focus on EUR/USD, or any European major, at the start of the London, or European, trading session.

Breakouts are one of the most popular forex trading strategies. You can start trading breakouts with City Index in a few quick steps:

  1. Open a City Index account or log in if you’re already a customer
  2. Search for the currency pairs you want to trade, preferably ones that are experiencing strong support and resistance levels
  3. Identify levels of support and resistance, set your stops and limits
  4. Wait for a breakout, which you can confirm with the indicators mentioned below, and enter your trade at the beginning of the trend

How to identify false breakouts

Sometimes the price of a security can momentarily break through a support or resistance level, only to fall or rise back into the channel it was previously trading in. This is known as a false or failed breakout and often occurs when traders misidentify levels of support and resistance.

As we’ve covered, high volume can indicate the difference between a real breakout and a false one. A volume indicator will signal if a breakout is strong or not, and how established levels of support and resistance are. Volume should pick up when the price reaches levels of support or resistance, if not, any breakout beyond these levels may likely be a fake-out.

Unfortunately, you can only identify a breakout as false once it moves back into its original range, which makes stop-loss orders critical to breakout trading. As mentioned in the exits section, setting a stop-loss order at the level of support or resistance involved in the breakout will protect you from running up losses in the event of a false breakout.

StoneX Financial Ltd (trading as “City Index”) is an execution-only service provider. This material, whether or not it states any opinions, is for general information purposes only and it does not take into account your personal circumstances or objectives. This material has been prepared using the thoughts and opinions of the author and these may change. However, City Index does not plan to provide further updates to any material once published and it is not under any obligation to keep this material up to date. This material is short term in nature and may only relate to facts and circumstances existing at a specific time or day. Nothing in this material is (or should be considered to be) financial, investment, legal, tax or other advice and no reliance should be placed on it.

No opinion given in this material constitutes a recommendation by City Index or the author that any particular investment, security, transaction or investment strategy is suitable for any specific person. The material has not been prepared in accordance with legal requirements designed to promote the independence of investment research. Although City Index is not specifically prevented from dealing before providing this material, City Index does not seek to take advantage of the material prior to its dissemination. This material is not intended for distribution to, or use by, any person in any country or jurisdiction where such distribution or use would be contrary to local law or regulation.

For further details see our full non-independent research disclaimer and quarterly summary.

CFDs are complex instruments and come with a high risk of losing money rapidly due to leverage. 69% of retail investor accounts lose money when trading CFDs with this provider. You should consider whether you understand how CFDs work and whether you can afford to take the high risk of losing your money. CFD and Forex Trading are leveraged products and your capital is at risk. They may not be suitable for everyone. Please ensure you fully understand the risks involved by reading our full risk warning.

City Index is a trading name of StoneX Financial Ltd. Head and Registered Office: 1st Floor, Moor House, 120 London Wall, London, EC2Y 5ET. StoneX Financial Ltd is a company registered in England and Wales, number: 05616586. Authorised and regulated by the Financial Conduct Authority. FCA Register Number: 446717.

City Index is a trademark of StoneX Financial Ltd.

The information on this website is not targeted at the general public of any particular country. It is not intended for distribution to residents in any country where such distribution or use would contravene any local law or regulatory requirement.

© City Index 2024